Product Name | 8 Way 2 Position Solenoid Valve |
---|---|
Rated Pressure | 100bar |
Valve Type | On Off Control Solenoid Valve |
Valve Material | Steel ,iron Or Aluminium |
Origin | China Mainland |
Product Name | Hydraulic Relief Valve |
---|---|
Cavity | VC10-2 |
Rated Pressure | 350 Bar |
Rated Flow | Max 80 Lpm |
Valve Material | Steel |
Product Name | 2-2 Proportional Directional Valve |
---|---|
Cavity | VC08-2S |
Pressure Rate | 210 Bar (3000 Psi) |
Flow Rate | Up To 20 L/Min, Less Than 5 Drops/min At 210 Bar (3000 Psi) |
Working Principle | 70HZ |
Product | KQHF28H1-25/60 Hydraulic Solenoid Valve With DG Or ER Connector 24V 12V Steel Valve Body |
---|---|
Rated Pressure | 60 Bar |
Rated Flow | 25L/min; |
Operating Temperature Range | -20℃-+90℃ |
Use Cleanliness Range | Use Cleanliness Range |
Product | 8 Way 2 Position Solenoid Valve |
---|---|
Rated Pressure | 60 Bar |
Rated Flow | 25L/min; |
Operating Temperature Range | -20℃-+90℃ |
Use Cleanliness Range | Use Cleanliness Range |
Product Name | Two Bank 6 Way 2 Position Solenoid Valve |
---|---|
Rated Pressure | 315Bar |
Rated Flow | 100L/Min |
Solenoid Valve Voltage | DC27V±15% |
Socket Type | ER DT04-2P |
Product Name | Relief Valve / Overflow Valve |
---|---|
Cavity | VC08-2 |
Rated Pressure | 350 Bar |
Rated Flow | 25L/Min |
Internal Leakage Rate | 2 Ports At 10 Bar, Maximum 5 Drops/minute |
Product Name | Hydraulic Safety Valve |
---|---|
Cavity | VC08-2 |
Rated Pressure | 350 Bar |
Rated Flow | 25L/Min |
Internal Leakage Rate | 2 Ports At 10 Bar, Maximum 5 Drops/minute |
Product Name | Proportional Solenoid Valve |
---|---|
Valve Cavity Hole | TC05013 |
Rated Pressure | P: 50 Bar, T: 30Bar |
Rated Flow Rate | 10L/Min, See Performance Chart |
Temperature Range | -20 ℃ To 90 ℃, Standard Nitrile Rubber Seal |
Product Name | KPV72-30A Hydraulic Solenoid Valve , Proportional Flow Valve , ER DG Connector 12V 24V 13V 27V Proportion Valve |
---|---|
Cavity | VC12-3 |
Rated Pressure | 240 Bar |
Flow Rate | Range A: 53 Lpm (14 Gpm) Range B: 31 Lpm (8 Gpm) Note: To Increase The Two-way Flow Rate |
Medium | Mineral Oil With A Viscosity Between 7.4 To 420cSt (50 To 2000ssu) Or Synthetic Oil With Lubricating Properties |