| Product Name | 24V Proportional Pressure Reduce Valve 6 Bank Hydraulic Valve Manifolds With Steel Block |
|---|---|
| Rated Pressure | 21MPa Auluminium Body |
| Maximum Peak Pressure | Steel Or Auluminium : 35Mpa/ 21MPa |
| Valve Type 1 | Hydraulic Solenoid Valve |
| Valve Type 2 | Cartridge Pressure Reduce Valve |
| Product Name | 24V Proportional Pressure Reducing Valve 6 Bank Hydraulic Valve Manifolds With Steel Block |
|---|---|
| Rated Pressure | 210 Bar Auluminium Body |
| Maximum Peak Pressure | Steel Or Auluminium : 35Mpa/ 21MPa |
| Valve Type 1 | Hydraulic Solenoid Valve |
| Valve Type 2 | Cartridge Pressure Reducing Valve |
| Product Name | OEM ODM Available Valve Manifolds With Sloenoid Valve Bank Hydraulic System Use Proportional Pressure Reduce Valve Group |
|---|---|
| Rated Pressure | For 6061-6T : 210bar Auluminium Body |
| Maximum Peak Pressure | 35Mpa/ 21MPa , Steel Or Auluminium Material Pressure Is Different |
| Valve Type 1 | Solenoid Valve |
| Valve Type 2 | Cartridge Pressure Reducing Valve |
| Product Name | KDPR08-33-0-N Kaienli Customized Hydraulic Pressure Reduce Porportional Solenoid Valve |
|---|---|
| Cavity | VC08-3 |
| Rated Pressure | P: 350 Bar, T: 30 Bar |
| Rated Flow Rate | 30L/Min, See Performance Chart |
| Temperature Range | -20 ℃ To 90 ℃, Standard Nitrile Rubber Seal |
| Product Name | Customized Car Using Hydraulic Porportional Solenoid Valve , Proportional Directional Valve |
|---|---|
| Cavity | According To Customer's Request |
| Rated Pressure | 240 Bar |
| Flow Rate | Range A: 53 Lpm (14 Gpm) Range B: 31 Lpm (8 Gpm) Note: To Increase The Two-way Flow Rate |
| Medium | Mineral Oil With A Viscosity Between 7.4 To 420cSt (50 To 2000ssu) Or Synthetic Oil With Lubricating Properties |
| Product Name | VBCD-SE-FL Hydraulic Counterbalance Valve With Two Cartridge Valve Customized Oil Thread |
|---|---|
| Rated Pressure | 350 Bar Steel Material Type |
| Maximum Peak Pressure | 210 Bar Aluminium Material Type |
| Valve Type | Overcenter Valve / Balance Valve / Dual Check Overcenter Valve,single Check Overcenter Valve |
| Valve Material | AT500-7 Or 6061-6T |
| Product Name | Customized Car Using Hydraulic Porportional Solenoid Valve , Proportional Directional Valve |
|---|---|
| Cavity | According To Customer's Request |
| Rated Pressure | 240 Bar / 350bar |
| Flow Rate | Range A: 53 Lpm (14 Gpm) Range B: 31 Lpm (8 Gpm) Note: To Increase The Two-way Flow Rate |
| Medium | Mineral Oil With A Viscosity Between 7.4 To 420cSt (50 To 2000ssu) Or Synthetic Oil With Lubricating Properties |
| Product Name | Customized Valve Using Hydraulic Porportional Solenoid Valve , Proportional Directional Valve |
|---|---|
| Cavity | According To Customer's Demand |
| Rated Pressure | 250 Bar / 360bar |
| Flow Rate | Range A: 53 Lpm (15 Gpm) Range B: 31 Lpm (8 Gpm) Note: To Increase The Two-way Flow Rate |
| Medium | Mineral Oil With A Viscosity Between 7.4 To 420cSt (50 To 2000ssu) Or Synthetic Oil With Lubricating Properties |
| Product Name | Best Selling Directional Proportional Solenoid Valve For Automobile Car Hydraulic System |
|---|---|
| Cavity | According To Customer's Demand |
| Rated Pressure | 240 Bar / 350bar |
| Flow Rate | Range A: 53 Lpm (14 Gpm) Range B: 31 Lpm (8 Gpm) Note: To Increase The Two-way Flow Rate |
| Medium | Mineral Oil With A Viscosity Between 7.4 To 420cSt (50 To 2000ssu) Or Synthetic Oil With Lubricating Properties |
| Product Name | Inverse Proportional Overflow Valve (cone Valve) For Pilot Control |
|---|---|
| Cavity | VC08-2 |
| Rated Pressure | 350 Bar |
| Rated Flow | 5L/Min |
| Working Principle | Two Position Two Way |
