Product Pictures:
Description :
VBCD-SE-3VIE hydraulic overcenter valve made in China customized type counterbalance valve
Overcenter valves:
Single overcenter valves inline:
Single OVC valves flangeable
Dual overcenter valves in line
DUAL OVC valves flangeable
Dual OVC with regenerative
In the regenerative circuits, the fluid in the rod side of the cylinder is sent to the piston side of the cylinder, regenerating the fluid usually destined to the reservoir. This way, in the piston side, the flow arriving from the rod side is added to the flow arriving from the pump, with a notable increase of the piston speed
This solution is utilised to control cylinders when a lower output stroke time is required without increasing the pump flow.
The primary purpose of an overcenter valve is to maintain control and stability in applications where a heavy load needs to be held in a specific position or where an actuator needs to move in a controlled manner. It achieves this by regulating the flow of hydraulic fluid in response to changes in pressure.
Product technical data:
Product real pictures :
Company Exhibitions:
Our Certificate:
Product processing procedures:
Our new factory and workshop :
Our warehouse:
Shipment:
| Type 1 | soloenid valve |
| Type 2 | manual cartridge valve |
| Type 3 | 2 way 2 position solenoid valve |
| Type 4 | 2 way 6 position solenoid valve |
| Type 5 | 2 way 8 position solenoid valve |
| Type 6 | Pilot oil resource valve |
| Type 7 | explosion proof valve |
| Type 8 | balance valve |
| Type 9 | check valve |
| Type 10 | Hydraulic lock |
| Type 11 | Valve manifolds |
| Type 12 | valve block |
Welcome your visit and inquiry !
